SoapEquipment.com

Willow Way LLC - 520 W. Main St., Hagerstown, IN 47346

Phone: 765-530-0307

Copyright © 1996-2016 Willow Way, LLC. All rights reserved Worldwide - All prices and product availability subject to change without notice.

Print this page

Easy Hoist Systems

Benefits

Increase Production

Let one person do the job of two! Speeds up production.

Save Time & Money

Less labor, Less cost per bar. Allows one person to lift that heavy mold.

Increase Profit

Less labor and time means less cost per bar-Equals More Profit!

Custom Designed

Designed to attach to our Air Soap Cutter™.

Built to Last

Built tough to withstand years of use.

Related Products

Air Soap Cutter™

Manual Soap Cutter™

Pot Tipper

Oil Heaters

Printer-Friendly Version

Click Images to Enlarge

Air Soap Cutter with Hoist System

Hoist System

Shown mounted to

Air Soap Cutter™

with Pro Mold

Manual Soap Cutter Mold

Manual Cutter™ Pro Mold

shown with

Wire Rope Lanyards

That attach Mold to Hoist

Air Soap Cutter™ - Easy Hoist System

HANDcraft by Willow Way Logo

Model: ACEHS

Air Soap Cutter™-Easy Hoist System

$1,356.00 ea

Click here to add this item to your Shopping Cart!

Click here to add this item to your WishList!
Click here to e-mail a friend about this item!

How are you going to lift that heavy mold? No problem. Our Easy Hoist System works in tandem with the Air Soap Cutter™…. in fact it attaches right to our Air Soap Cutter™.

Description

bullet

Will lift up to 440 lbs (200Kg). Just a touch of a button to operate. The average Air Soap Cutter™ Mold when full is about 140 lbs (63.5Kg).

bullet

Built tough to withstand years of use.

bullet

Easy to Use, Our Easy Hoist System uses a set of Wire Rope Lanyards to lift the mold. These are stainless steel cables, with loops that loop securely at the four lift points (top threaded rods), and are then hooked to the hoist block for lifting.

bullet

The hoist itself is mounted to a ball bearing, four wheel trolley, set in a heavy duty track above the Air Soap Cutter™. This allows you to easily move and place the mold onto our rolling Air Soap Cutter™ table.

bullet

Easy to assemble and, The Easy Hoist System is Easy to Assemble; about 30 to 45 minutes for one person. No special tools required.

Specifications

bullet

All steel construction. 2” X 2” (5cm X 5cm) steel tubing and 2” X 2.5” (5cm X 6.4cm) Track.

bullet

Protected with a tough, baked on powder coat, enamel finish.

bullet

440 lb (200Kg) lift capacity.

bullet

40 ft. (12.2m) of 1/8” (.32cm) carbon steel cable. 5 1/2 ft (1.7m) Remote control cable

bullet

110 volts, 60hz, 4.5 amps.

bullet

All hardware is included.

bullet

Can ship via FedEx or UPS, two cartons, total weight approx. 80 lbs (36Kg)

Note:

bullet

Some systems may require a minor attachment to a wall or counter weight.

Manual Soap Cutter Hoist System

Manual Soap Cutter™

Easy Hoist System

Manual Soap Cutter Mold

Manual Cutter™ Pro Mold

shown with

Wire Rope Lanyards

That attach Mold to Hoist

Manual Soap Cutter™ - Easy Hoist System

HANDcraft by Willow Way Logo

Model: MCEHS

Manual Cutter™-Easy Hoist System

$454.00 ea

Click here to add this item to your Shopping Cart!

Click here to add this item to your WishList!
Click here to e-mail a friend about this item!

Need an easier way to hoist that soap mold onto your cutting table? A simple solution is to install a Manual Soap Cutter™ Easy Hoist System. After that it is as easy as pushing a button.

Description

bullet

Will lift up to 440 lbs (200Kg). Just a touch of a button to operate. The average Manual Soap Cutter™ Mold when full is about 120 lbs (54.5Kg).

bullet

Built tough to withstand years of use.

bullet

Our MCEHS, Easy Hoist System uses a set of wire rope Lanyards to lift the mold. These are stainless steel cables, with loops that loop securely at the four lift points (top threaded rods), and are then hooked to the hoist block for lifting.

bullet

The hoist itself is mounted to a ball bearing, four wheel trolley, set in a heavy duty track above the Cutter table. This allows you to easily move and place the mold next to your Manual Soap Cutter™.

bullet

The Manual Soap Cutter™ Easy Hoist System is easy to assemble; The most important thing is a good solid mount to the structure above. We can assist in any mounting problems or special considerations.

Note:

bullet

Tongs are no longer used, we will be replacing the Easy Hoist Picture soon. See description above.

Specifications

bullet

All steel construction. 2” X 2.5” (5cm X 6.4cm) Track.

bullet

Protected with a tough, baked on powder coat, enamel finish.

bullet

440 lb (200Kg) lift capacity.

bullet

40 ft. (12.2m) of 1/8” (.32cm) carbon steel cable.  5 1/2 ft (1.7m) Remote control cable

bullet

110 volts, 60hz, 4.5 amps.

bullet

All hardware is included. Track mounting hardware is not included, this varies with structure.

bullet

Can ship via FedEx or UPS, two cartons, total weight approx. 40 lbs (18Kg)

bullet

Call for more details. We will be glad to help you with your system design.

Note:

bullet

The Manual Soap Cutter™ Hoist system requires a secure mounting, either to the structure above or a freestanding support.