Oil Heater Reducer


This reducer is great for filling containers directly from our Oil Heaters!

  • Much more efficient than pouring into different containers to fill.
  • The perfect option for those not quite ready for our Easy Fill Bottler.
  • Reduces flow from 1.5″ to 3/8″.


  • This reducer can help save a considerable amount of time on filling small cavity molds
  • Fits into our 1.5″ (38mm) ball valve
  • Reduction from 1.5″ (38mm) to a 3/8″ (10mm) flow
  • Fully assembled – no pipe cement or Teflon tape needed to attach to the 1.5″ ball valve.
  • Will handle temperatures up to 220°F (104°C)
  • Will handle most acids and alkalis

Instructions for using Ball Valve Reducer
  1. Thread the reducer into the ball valve (hand tight) so it is easy to remove
    • Plastic to plastic makes a good seal and does not need to be extremely tight.
  2. Make sure the reducer valve is closed.
  3. Open the big ball valve, and start dispensing using the small ball valve on the reducer.
  4. When finished, close the big valve and unscrew the reducer.
  5. Clean and wash, and you are ready for the next batch!
Oil Heater Reducer
Oil Heater Reducer