Mighty Mixer


The Mighty Mixer is extremely versatile and durable. It will mix your Soap, Lotions, Dry Materials, Oil blends, Body Washes and much more.

  • Variable Speed Control – 0 to 2500rmp with the turn of a knob.
  • Telescoping Height adjustable stand can go from 42″ (107cm) to 78″ (198cm).
  • The entire motor assembly will pivot up or down to mix in containers of different heights.
  • Note: All Mighty Mixers require a lead time of 4-6 weeks.

From: $1,390.00

Build Your Mighty Mixer Bundle

Motor Voltage Upgrade - 220V

This mixer comes standard with a 120v motor. An upgrade may be necessary for International customers.

Mighty Mixer Optional Tripod Base

Complete with installation bolts.

Hands-Free Pot Whipper

Best for Soaps and General Use.

Double High Shear Mixing Wand

Best for Lip Balms, Body Butters, Lotions, Massage Oils, etc.

Shaft Coupling for Mighty Mixer

Required for Pot Whipper or High Shear Blade shafts 36" and up.

Too many choices? Call us and we'll help you build the perfect system.

  • Works very well with our Pot Tippers and Oil Heaters.
  • The easy to adjust Variable Speed Control will give you as much or as little speed as you need for mixing Soap, Lotions, Dry Materials, Oil blends, Body Washes, etc.
  • Designed to mix batches from 20lbs (9kg) up to 500 lbs (227kg)
  • Approximate trace times:
    • 30 lbs (14kg) to 110 lbs (50kg) is about 5 to 10 minutes at a little over half speed (1500 rpm).
    • 250 lbs (114kg) to 500 lbs (227kg) is around 15 to 20 minutes at about 1800 rpm.
  • Complete with a Heavy duty ½ hp Constant Torque Motor
  • Very easy to raise and lower by simply removing a pin and adjusting to your desired height
    • Height is adjustable in, 1”  (25mm) increments for exact positioning).
  • The entire motor assembly will also pivot up or down, from 0 degrees (vertical) to 90 degrees (horizontal).
    • Will also lock at 90 degrees horizontal for cleaning, or for readiness to insert into the Pot Tipper or Tank.
  • The mixing angle of the Mighty Mixer can be set anywhere from 0 to 60 degrees by adjustment of the Pivot Pin.
  • Comes standard with a Floor Mount Plate, for mounting permanently to a floor with 5/16” (8mm) anchors or bolts (not included).
    • The Floor Mount Plate can also be easily attached to the optional rolling Tripod Base with three bolts (included with Tripod Base).
  • Heavy Duty Telescoping Tubular Box Frame
  • Overall Height: 78” (198cm)
  • Weight: Approx. 80 pounds
  • 12 gauge steel frame
  • The Floor Stand Mount and Motor Mount is 3/16” (5mm) steel plate
  • Industrial, Variable Speed Drive Control
  • NEMA 4/12 – Wash-Down Enclosure and Controls
  • Heat Sink Enclosure to guard electronic components, from overheating
  • 120 / 240 volt AC, 1/2 HP
  • Permanent Magnet, 90 volt, DC Motor.
  • Amp. draw is about 6.5 amps and 780 watts
  • NEMA Frame, TEFC, SCR rated (speed control rated)
  • Motor has permanently sealed lubricated, ball bearings.
  • High starting torque for heavy load conditions.
  • Wired for clockwise direction, can be reversed for counter clockwise direction.
  • Motor shaft is 5/8” (16mm)

Watch our Mighty Mixer in action!