HANDcraft™ Universal Bottle Labeler

Note: These items are made to order therefore cannot be added to our cart, for Bottle Labeler orders, Contact Us.

This labeler does it all….Tapered Bottles, Square Bottles, Oval Bottles, Round Bottles, Front and Back Labels; just about everything. And the best part, it is easy to setup and use.

Description:

• Easy to use and quick to set-up.
• Works with Lip Balm Tubes with the purchase of Lip Balm Attachment (see below).
• This handy label applicator will do Tapered Bottles, Square Bottles, Oval Bottles and Round Bottles. Send us your container if in doubt.
• Works perfectly with labels printed by our Primera Label Printer.
• The HANDcraft™ Universal Labeler can apply pressure sensitive labels to any container, as small as a 1/2″ to as large as 8″ (13mm to 200mm) in diameter.
• The HANDcraft™ Universal Labeler has a small foot print, only 12″ (30cm) wide x 24″ (61cm) long, but it is certainly “BIG” on what it can accomplish.
• Applies pressure sensitive labels, made of plastic, paper, Mylar, etc.
• Will handle label rolls up to 6 1/2″ (165mm) in width and 12″ (300mm) in diameter.
• Uses standard, 3″ (76mm) core label rolls, which can be Die Cut or Butt Cut.
• Capable of applying single labels or front and back labels.
• Label Applicator speeds for single labels, 15 to 20 per minute, for front and back labels, 6 to 8 per minute.
• We have customized our labelers for many different applications, such as, Syringes, Tins, Hard Plastic Boxes and Books, Soap, Test Tubes and many other odd applications. Doesn’t hurt to ask. Click here to contact us. (Contact Sales)

Specifications:

• Label dimensions, can range from, 3/4″ to 6 1/2″ (19mm to 165mm) in width.
• The maximum roll width, with backing, is 6 1/2″ (165mm). This is called, “Web Width” and is also the approximate label height, as it goes onto the container.
• The Roll Core Size is, 3″ (76mm) in diameter. This is the inside diameter of the paper core that the labels are wound onto.
• The maximum overall, Label Roll Diameter is, 12″ (300mm).
• The industry standard of, 1/8” to 3/16” (3mm to 5mm) between labels works best.
• Construction ¼ “ milled Alcoa® aluminum on the main frame. Other materials include poly-propylene, acrylic, phenolic, brass, stainless steel and anodized aluminum.

Please Note:

• If you are in doubt about a container or label it is best to send a sample to us, to verify.
• Paper backing is best but the HANDcraft™ Universal Labeler will work with any backing.

Label Instructions for your Printer (Label Supplier):

• For square and oval bottles, using the “Tamp Set Up” as shown in the top picture, ask your Printer for Label Position #1.
• Labels unwind from the bottom….Under – Over.
• Label direction….Your printer will understand the standard label direction numbers below. You only need to tell them which number you prefer and that the labeler unwinds from the bottom.
• #4: is best direction for a right handed person and a label running parallel to bottle. Bottom of bottle to left, neck to right. Left edge of label leading.
• #3: is best direction for a left handed person and a label running parallel to bottle. Bottom of bottle to right, neck to left, Right edge of label leading.
• #2: is best direction for a right handed person and a label running right angles to container as in a lip balm tube, Bottom of tube to left, top to right. Top edge of label leading.
• #1: is best direction for a left handed person and a label running right angles to container as in a lip balm tube, Bottom of tube to right, top to left. Bottom edge of label leading.