Easy Fill Bottler
-
Our Easy Fill Bottler is used in many applications in the cosmetic, personal care and even food industries.
- Manually or semi-automatically operated.
- Provides accurate filling and depositing of products.
- Concerned about your product’s viscosity? Contact us.
From: $8,680.00
Build Your Easy Fill Bottler Bundle
Description
- Approximate Production Rates*: of a
- Beginner: About 10 bottles per minute (600 per hour)
- With Experience: Over 25 per minute (1500 per hour)
- Primarily designed to fill Personal Care products into containers at estimated speeds of 5 to 20 containers per minute.
- Filling speeds are dependent upon:
- Piston stroke length
- The product being dispensed
- Product viscosity
- Inside diameter of the discharge port in the nozzle
- Product reaction at the bottom of the container (fizzing/foaming)
- Will handle anything from Essential Oils/ Fragrance Oils to very thick lotions and creams.
- Will also handle food products such as jams, jellies and salsas.
- Food products will require a different valve housing and closure than for the body care products.
- Our interchangeable product cylinders, range in size from:
- Diameter: 3/8″ in. to 2 in. (10mm to 50mm)
- Fill Range: From .06 to 8.7 fluid ounces (1.7 ml to 257ml) in a single stroke.
- We will work with you to find the optimum cylinder size or sizes for your application.
- For most customers the 2″ (50mm) cylinder is the ideal size and will fill from 2 oz. to 8.7 oz (60ml to 257ml) at a 1/2% to 1%, accurate fill rate.
- You can fill as low as 1 oz. (30ml) with the 2″ (50mm) cylinder, with an accuracy of 2% to 3%.
- For filling large quantities, such as a quart or a liter, it is just a matter of making more fill cycles.
- Example: 16 Ounce Container = two 8 Ounce fill cycles.
- For most products, you can clean between scents and products by using warm water and a low suds soap.
- For some liquids and oils, cycling a little alcohol and water through will be sufficient.
- Powered by small Air Compressor (not included) – see specifications.
Specifications
- All metal product contact parts are made of stainless steel, the piston and valve spool are of Ertalyte and all “O”Rings and Gaskets will be made of Viton.
- The Viton seals will withstand petroleum products, essential and fragrance oils, vegetable oils and many solvent bases.
- Equipped with:
- 5 Gallon Stainless Steel Hopper
- 2″ (50mm) diameter Stainless Steel Cylinder
- Two types of machine cycle
- Start mechanisms
- Auto cycle mode
- Single cycle foot pedal control
- Adjustable stroke rate control valves to adjust filling speed while machine is in operation
- Designed to cycle up to 40x per minute.
- Frame is made of Stainless Steel
- All connections between the hopper and valve spool, cylinder and valve spool, and nozzle and valve spool are either quick disconnect clamps or quick disconnect fittings to aid in the ease when disassembling and cleaning.
- Base is 19.5″ x 9.5″
- Weighs approximately 75 pounds
- Operated by an air compressor (not included)
- Power required: 90psi (6.12atm) / 1.5cfm (43lpm)
- Detailed instructions included