How do you adjust the depth for the
Cylinder, Cuber and Tablet molds?
EZ Way Bath Bomb Press™ - Pneumatic (Air Powered) Bath Bomb
Press, with Soap Bar, Stamper Attachment.
The EZ Way Bath Bomb Press™
is the culmination of years of experience in making Bath Bomb equipment.
We invented the Bath Bomb Press and of course, the next
step was the first Pneumatic Press, December 18, 2006. Our next step was
a press that could utilize every mold we have. We have many products
that have yet to make it to our websites. We may spend years perfecting
products before putting them on our sites. Fifty percent of our work is
custom. If you need it….we can build it!
So... what will it do?... Everything, our Bath Spheres
(MaxiBalls), our Sculpted Bath Fizzies, our Designer Bath bombs and of
course Custom Bath bombs.
The Ultimate in making Bath Bombs. You can use any Bath Fizzy Mold we
make... Choose from over 30 Different Bath Bomb Molds!
Not only that…. it is easy to set up, easy to change
molds and it makes the tightest Bath Bombs on the planet.
The EZ Way comes complete with a detailed booklet and
instructional DVD with tips, formulas, and step-by-step instructions. In
addition, you have our great Tech Support, if you run into a project
that needs tweaking.
All of our Bath Bomb Presses will speed up your production and make
better Bath Bombs, the EZ Way Pneumatic Press is more consistent,
because the pressure (all 200 lbs per square inch) is constant. It is
less work, because it is doing all the up and down work for you. At the
end of the day, after making 1500 Bath Bombs….Yes, you will not be as
Every Bath Fizzy Mold we make, will work
on the EZ Way.
Because of our
large selection of Bath Bomb Molds...
EZ Way Bath Bomb Press does not come with a stock mold.
Why get stuck with something you don’t want. Order
Any Mold On This Page Below...
Don’t forget to take advantage of our
10% discount on multiple molds.
Stamper Attachment for Soap Bars.
Easy to adjust and use. This
attachment will accommodate most large and amenity bar
Very fast to set up. The EZ
Way allows you to set a constant, even pressure and
depth, for the perfect impression every time.
10% When You Purchase 3 or More EZ Way
Bath Bomb Press Molds
Simply add 3 or more Extra Bath Bomb
Press Molds or Sculpted Molds to
your cart - Use Coupon Code
Must be added during
same shopping cart session to receive
discount. Not valid with any other offer
or discount. Half Rounds and Dip Molds
not eligible for discount.
of your balls having a flat spot once they dry? Our Fizzy Foam
will lift them up on a 1” (2.5cm) x 1” (2.5cm) pedestal.
The 1” pyramids
were designed to hold your bath bombs in place while
allowing the air flow underneath them.
No matter what
you call them fizziers, disks, melts, steamers, spheres,
balls, or soothers, this the perfect resting place for them.
These precut 14”
( 35.6cm) x 29” (73.7cm) sheets fit perfectly into our 400 BVT Drying Trays
so you can dry hundreds dare we say thousands of Bath Bombs
in a 16” (40.6cm) x 32” (81.3cm) space. Add an Economy Dolly
make moving your trays full of bombs from production to
packaging a breeze.
Our Sculpted Bath Bombs are a dream to make. Make your
Bath Bombs stand out with these different shapes. They pack extremely
hard and fizz a long…long time. Your customers will love them. They dry
very quickly, store easily.
Each mold is machined to work with the adjustable
fence on the EZ Way Bath Bomb Press.
You can’t make a mistake on these. They are so easy to
de-mold. Just, turn it over and drop it out.
Press as hard as you like. The mold is nearly
Beginners; can figure about 5 Bath Bombs per minute, not
including the mixing of ingredients.
Thickness can be adjusted from very thin to about 1
You make them as thin as ½”. Much depends on
compression and your ingredients.
Most Bath Bomb Makers fill the mold full, level it off
and press. For most of the Sculpted Shapes this will give you about
a 1” thickness.
Make three of these cute little bath fizzies at a
Your wholesale customers will love them, because their
customers will go through them like candy. Would one be enough for a
child in the tub? There are all sorts of interesting ways these can be
presented and packaged. About the size of a Bubble Gum Ball.
Attaches easily to your EZ Way Bath Bomb Press or
Willow Bath Bomb Press
Make three balls at a time. Simply fill up the tubes,
press, place on the plunger and pop them out.
Makes a 1” (25mm) diameter sphere, about the size of a
big Bubble Gum Ball.
Weight varies with formulation, about 1/2 ounce
The rule of thumb for your customers, using these little
globes of delight is…..One is not enough, Three is too many, Two is just
right! Package them in tubes, boxes, egg cartons or like Jaw Breakers in
an old fashioned glass jar.
Attaches easily to your Willow Bath Bomb Press
Make two balls at a time. Just fill up the tubes, pull
the lever, place on the plunger and pop them out.
Makes a 1 1/2” (38mm) diameter sphere, about the size
of a Ping Pong Ball.
Weight varies with formulation, about 1 ounce (28gr).
Use of this website
signifies your agreement to the
* All specials are for a limited time only. Offers cannot be
combined with any other discount, offer, promotion or special
incentive program and are not valid on: (a) prior purchases, (b)
prior quotes or offers. Void where prohibited. Please
visit the links above for more information including latest pricing,
availability, and restrictions on each offer. Prices are in U.S. dollars (USD)
$30 minimum purchase (excluding shipping and tax) . All prices and product
availability subject to change without notice. Unless noted, prices
do not include shipping and applicable sales taxes.
Please call or e-mail us with any questions or to place an order.