Oil Heater Reducer
-
This reducer is great for filling containers directly from our Oil Heaters!
- Much more efficient than pouring into different containers to fill.
- The perfect option for those not quite ready for our Easy Fill Bottler.
- Reduces flow from 1.5″ to 3/8″.
$53.43
Description
- This reducer can help save a considerable amount of time on filling small cavity molds
- Fits into our 1.5″ (38mm) ball valve
Specifications
- Reduction from 1.5″ (38mm) to a 3/8″ (10mm) flow
- Fully assembled – no pipe cement or Teflon tape needed to attach to the 1.5″ ball valve.
- Will handle temperatures up to 220°F (104°C)
- Will handle most acids and alkalis
Instructions for using Ball Valve Reducer
- Thread the reducer into the ball valve (hand tight) so it is easy to remove
- Plastic to plastic makes a good seal and does not need to be extremely tight.
- Make sure the reducer valve is closed.
- Open the big ball valve, and start dispensing using the small ball valve on the reducer.
- When finished, close the big valve and unscrew the reducer.
- Clean and wash, and you are ready for the next batch!
