80 Quart Pot Tipper
-
The ultimate way to mix and pour soap!
- The stainless steel pot swings freely on a sturdy steel frame.
- Six height positions for easy use and convenient mixing heights.
- Rolls easily on 4″ (10cm) casters, even when fully loaded.
From: $1,200.00
Build Your Pot Tipper Bundle
The ultimate way to mix and pour soap.
Description
- Heavy gauge 80 Quart (76L) Stainless Steel Pot swings freely on a sturdy steel frame.
- Adjustable for left or right hand use.
- 6 height adjustments 1″ (2.54cm) each
- Mix over 140 pounds (64kg).
- Works with our Oil/Wax Melter Heaters for multiple efficient pours.
- No maintenence – easy to clean.
Specifications
- Pot:
- Diameter: 19.625″ (49.8cm)
- Depth: 15.5″ (39.3cm)
- Capacity: 80 Quarts
- 18 Gauge Stainless Steel
- Deck:
- Length: 13.5″ (34.2cm)
- Width: 25.2″ (64.1cm)
- Base:
- Width: 25.2″ (64.1cm)
- Length: 24″ (60.9cm)
- 2″ (5cm) steel box tubing frame
- 4 x 4″ (10cm) casters
- 2 fixed, 2 swivel
- 6 height adjustments of 1″ (2.54cm) each
- Overall Height:
- Tallest Height: 41.5″ (105.4cm)
- Lowest Height: 36″ (91.4cm)
FAQ
While you can heat the bottom of our Pot Tipper, it is not recommended as a permanent fix for heating your oils. Direct heat makes it very easy to scald your oils and damage them permanently. A lack of heat dispersion can create the same dead oil that would come from a fryer – taking away the entire purpose of using high-quality oils.
We always recommend heating your oils in a Double Jacketed Oil/Wax Melter. The water jacket ensures dispersed heat, eliminating the possibility of scorching and ruining your oils. Not to mention that they increase efficiency in your soaping by making large batches a possibility.
A speed between 1500 and 1800 RPM is best while stirring at a 15-18° angle. Mixing at speeds lower than 1200 RPM will likely lengthen the time it takes to trace.