Soap Drying Trays and Racks

Benefits

Fully Stackable Trays. There is no need for expensive, space consuming racks.

Made of a co-polymer polypropylene structural foam, extremely tough.

Broad temperature tolerance.

Exceptional dimensional stability.

Heavy duty, long life construction.

Exclusive slot vent design, can cut drying time up to 25% or more!

Ergonomically designed for easy handling and reach capability.

Want to Know More?

Visit our FAQ page on Soap Drying Trays.

Find answers to questions like these and more:

	Is there any way to reduce my drying time?
	How do you know what size tray to use?

Related Products

Air Cutter Mold

Soap Pot Tipper

Oil Heater

Printer-Friendly Version

Click Images to Enlarge

Willow Way

Soap Drying Trays

Soap Tray Dolly

Soap Tray Dolly

Shown With

Soap Drying Trays

Stacked on Top

Our Soap Drying Trays are the Ultimate, when it comes to shaving loads off of your curing time.

Some customers say as much as 40%.

In addition to less drying time, there is saving all that labor in racking your bars and time in turning your bars to get an even cure.

Willow Way Soap Drying Trays Description:

	Exclusive slot vent design, can cut drying time up to 25% or more!
	No need to turn your bars, to keep them from drying unevenly and curing unevenly. This can be very important with decorated bars that cannot be turned.
	Durable and Tough enough to withstand constant and rough handling.
	Heavy duty, long life construction.
	Easy to clean, no sticking, with excellent release characteristics.
	Space Saving and can be stacked 30 or more trays high.
	Made of a co-polymer polypropylene structural foam.
	Broad temperature tolerance. -40°F (-40°C) to 197°F (97°C).
	Ergonomically designed for easy handling and reach capability.

When placed on one of the “Soap Tray Dollies” you have a mobile curing system that can quickly cure, 1,000 >>> 2,000 >>> and more bars in only, 16” x 32” (41cm x 82cm) of Floor Space!!

Save Hundreds of $$$$$

Form a Co-op within your List Group or Guild.

Buy a pallet or two and divide it up.

5% Discount to Verified Co-ops

We have found that the quickest way to stack and dry your bars is to stand them on the long edge. See diagram below.

Space them with about an 1/8" (3mm) between the bars and about 1/4" (6mm) between the rows. Take them off your Bar Cutting Table just the way they were cut, then just separate them out, as you place them on the tray.

The average 3.5 to 4 oz. (100g to 120g) bar size can stack about 100 to a tray (up to about 25 lbs. (11.4 kg).

If the bars are under 3/4" (19mm), you may need to place a row on top of the bars, straddling the rows. See diagram below. This method works very well for small sample bars, even down to 3/8" (9mm) or less. This locks them together and allows you to move the tray around. It's quick and easy.

Try our Soap Tray Dolly (solid tray on wheels). It is inexpensive, durable and works on almost all applications. It also doubles as another tray.

For limited space considerations, stack trays as high as you want, for ease of use and working heights stack low. You are not restricted by rack limitations.

Need even more space and mobility? Stack the trays on a pallet and move easily with a pallet jack or fork lift.

Speed drying by placing fans around trays. The slotted design and open sides allow maximum air flow around product.

Cost varies according to tray and to quantities ordered.

Minimum Order= One Box

Soap Drying Tray Specifications