|
|
Benefits |
|
Increase Production
Move that Oil and other liquids faster and easier!
Save Time & Money
Less labor, Less cost per bar.
Increase Profit
Less labor and time means less cost per bar-Equals More Profit! |
Related Products |
|
Air Soap Cutter
Manual Soap Cutter
Soap Pot Tipper
Oil Heaters |
Helpful Tip...
|
NOTE:
When using our pumps, other than
the Lotion Pumps, be sure the container you are pumping from,
has an air vent to allow air in. |
|
|
Click the Images above to get to your choice quickly.... |
|
Click Image to Enlarge
Piston
Drum Pump
|
|
|
Model: AC1110
|
HANDcraft Piston Pump |
$36.50
|
OUT OF STOCK |
|
 |
|
|
|
The HANDcraft Piston Pump is easy to use and quickly set up. This is a low cost, versatile pump for nearly anything you want to use it for. Buy one for each of your barrels.
Description
 |
Versatile, use with: 15, 30 and 55 Gallon Drums
|
|
|
Fits standard, 1" (25.4mm) and 2" (50.8mm) bung openings
|
|
|
Dispenses, 12 Ounces (.36L) per stroke.
|
|
|
Telescoping Suction Tube, easily adjusts for different depths.
|
|
|
Quickly primes in a few strokes.
|
|
|
Spout is threaded for standard hose fitting.
|
|
Note: If you are not
sure it will pump your product, send a 16oz sample to
us. See bottom of this page for address. We will not be
able to tell you over the phone. |
|
| |
|
Click Image to Enlarge
Super Duty Drum Pump | |
|
Model: AC1116
|
HANDcraft Drum Pump |
$78.40
|
OUT OF STOCK |
|
|
|
|
|
Do you need something that will quickly fill that 35 gallon Oil Heater? This is the pump that will do it, easily and efficiently.
Description
|
|
For use with 15 Gallon, 30 Gallon or 55 Gallon drums. |
|
|
Features a telescoping tube, a high-angle discharge. spout with screen and curved discharge spout. |
|
|
Tested for over 10,000 gallons before piston requires replacement. |
|
|
Includes telescoping intake tube. |
|
|
Includes 2" NPT integral bung adaptor. |
|
|
Parts in contact with oils are, carbon steel, neoprene, delrin. |
|
|
You can quickly pump 2 lbs (900g) of oil or 32 oz (1.9L) in one easy stroke. |
|
|
Tough die-cast metal alloy pump.
|
|
Note:
If you are not sure it will pump your product, send
a 16oz sample to us. See bottom of this page for
address. We will not be able to tell you over the phone. |
|
 | |
|
Click Image to Enlarge
Easy Action Lever Pump | |
|
Model: AC1112
|
HANDcraft
Lever Action Pump |
$53.30
|
OUT OF STOCK |
|
|
|
|
|
The HANDcraft Lever Action Pump is just that, Easy to operate. It comes with a hose to reach your buckets, Oil Heaters and measuring containers.
Description
|
|
Easily adjusted, Telescoping Suction Tube, fits any drum size. |
|
|
Works with 2" (50.4mm) and M64x4 standard drum openings. |
|
|
Discharge Hose with spout is, 39" (1 meter) |
|
|
The Easy Action, will pump a little over 12 ounces or .36 liters per stroke. |
|
|
Self Priming.
|
|
Note: If you are
not sure it will pump your product, send a 16oz sample
to us. See bottom of this page for address. We will not
be able to tell you over the phone. |
|
| |
New Concept in Power Pumps . . . |
|
Click Image to Enlarge
Universal Motor Head |
The Universal Motor Head is for use with the Pump Tubes shown below.
This is the power source for the Pump Tubes. | |
|
Model: UPM640
|
Universal
Motor Head |
$391.00
|
 |
|
|
|
|
|
Model: UPM640-220 |
Universal
Motor Head - 220 Volt |
$421.00
|
|
|
|
|
|
|
The easiest and fastest way to pump out of drums, tanks, barrels, buckets and pots. Just a few turns and this Motor Head can switch to the next Pump Tube in seconds.
Description
|
|
Save money by using one Motor Head for several pumps. |
|
|
A light, easily handled, high-performance pump head, for almost all types of slightly viscous, aggressive and non-flammable liquids. |
|
|
No more waiting for the pump to drain before switching drums, just move the motor. |
|
|
No more need to flush out the pump, just move the motor. |
|
|
No maintenance. |
Specifications
|
|
Universal motor, 120 volt, 640 watt, 60hz., 0.85 HP.
Note: 220 volt available, order below. |
|
|
Will pump up to 45 gallons (170L) per minute. |
|
|
Delivery head up to 31 feet (9.5m) |
|
|
Weight approx. 6.5 lbs. (3kg) |
|
|
Standard, with extra long, 16' (4.9m) cord. |
|
|
Bipolar on/off switch with single pole thermal over current release. |
|
|
Double insulated. Open drip-proof motor. |
|
|
Not suitable for highly flammable liquids. |
|
|
Warranty 1 year |
| |
|
Click Image to Enlarge
HANDcraft
Poly Drum Pump Tube |
|
HANDcraft
Poly Drum Pump Tube
Shown here mounted to
Universal Motor Head
(Not Included) |
|
Pump Tube Drum Adaptor
(Included) | |
|
Model: PPL39 |
HANDcraft Poly Drum Pump Tube |
$348.00
|
|
|
|
|
|
|
The Ultimate Pump for our industry. Switch from one drum to the other with one motor while leaving the Pump Tube in the Barrel. Handles, many types of liquids, even caustic soda.
Description
|
|
Save money by using one Motor Head for several pumps.
|
|
Please note: the item we are describing is the Pump Tube that goes in the drum, the Motor Head is designed to move from one pump tube to the other. Read Motor Head description. |
|
|
|
The Poly Pump Tube will pump up to 23 gallons per minute (87L) |
|
|
Will handle liquids, to temperatures as high as 122F (50C) and pump liquids up to 900cps. Constant duty, 500cps. |
|
|
Note: cps or centipoise. Centipoise is the measurement used for the viscosity of a liquid. Examples; SAE 50 weight oil is 540cps, soybean oil is 160cps, honey is 3000cps). |
|
|
High chemical resistance; will pump, caustic soda, vegetable oils, liquid soap, etc. Not to use with alcohol or petroleum products (see Stainless Pump Tube). If any liquid you want to pump is in question please ask. |
|
|
Maintenance and replacement is extremely easy on these versatile pumps. No special tools required. |
|
|
See our versatile dispensing nozzle for a great way to dispense from the Drum Pump Tube. |
|
|
Use with plastic, or metal barrels. |
|
|
You can even pump out of shorter tanks, buckets, etc. as the Pump Tube allows you to sit right on the bottom of the drum or container. |
|
|
Included with every Pump Tube is a Drum / Barrel, Bung Adaptor for a standard 2" NPT, bung. Just screw into your drum and slip in the Pump Tube. |
Specifications
|
|
Tube diameter 41mm (1.6") |
|
|
Temperatures to 122F (50C) |
|
|
Pump Tube material; Polypropylene |
|
|
Impeller; Polypropylene |
|
|
Discharge connection, 3/4" (19mm) |
|
|
Length is 39" (99cm). Other available lengths are, 27" (69cm), 47" (119cm) and lengths up to 78" (198cm). |
|
|
Weight 39", 9# (4kg). |
|
|
Warranty 1 year |
| |
|
Click Images to Enlarge
HANDcraft
Stainless Drum Pump Tube |
|
HANDcraft
Stainless Drum Pump
Tube
Shown
here mounted to
Universal Motor Head
(Not Included) |
|
Pump
Tube Drum Adaptor
(Included) |
|
|
Model: SSL39 |
HANDcraft Stainless Drum Pump Tube |
$621.00
|
|
|
|
|
|
|
The Ultimate Pump for our industry. Switch from one drum to the other with one motor while leaving the Pump Tube in the Barrel. Handles Alcohol, caustic soda, petroleum products.
Description
|
|
Save money by using one Motor Head for several pumps.
|
|
Please note: the item we are describing is the Pump Tube that goes in the drum, the Motor Head is designed to move from one pump tube to the other. Read Motor Head description. |
|
|
|
The Stainless Steel Pump Tube will pump up to 29 gallons per minute (110L) |
|
|
Will handle liquids, to temperatures as high as 212F (100C) and pump liquids up to 900cps. Constant duty, 500cps. |
|
|
Note: cps or centipoise. Centipoise is the measurement used for the viscosity of a liquid. Examples; SAE 50 weight oil is 540cps, soybean oil is 160cps, honey is 3000cps). |
|
|
High chemical resistance; will pump, caustic soda, vegetable oils, liquid soap, alcohol and petroleum products. If any liquid you want to pump is in question please ask. |
|
|
Maintenance and replacement is extremely easy on these versatile pumps. No special tools required. |
|
|
See our versatile dispensing nozzle for a great way to dispense from the Drum Pump Tube. |
|
|
Use with plastic, or metal barrels. |
|
|
You can even pump out of shorter tanks, buckets, etc. as the Pump Tube allows you to sit right on the bottom of the drum or container. |
|
|
Included with every Pump Tube is a Drum / Barrel, Bung Adaptor for a standard 2" NPT, bung. Just screw into your drum and slip in the Pump Tube. |
Specifications
|
|
Tube diameter 41mm (1.6") |
|
|
Temperatures to 212F (100C) |
|
|
Pump Tube material; Stainless Steel |
|
|
Impeller; ETFE (Ethylene TetrafluoroEthylene) |
|
|
Discharge connection, 1" (25mm) |
|
|
Length is 39" (99cm). Other available lengths are, 27" (69cm), 47" (119cm) and lengths up to 78" (198cm). |
|
|
Weight 39", 11# (5kg). |
|
|
Warranty 1 year |
| |
|
Click Image to Enlarge
HANDcraft
Poly Pump Nozzle Kit | |
|
Model: AC1106 |
HANDcraft Poly Pump Nozzle Kit |
$134.00
|
|
|
|
|
|
|
The ideal way to dispense from your Pumps. Great control, as easy as pumping gas. Quick to install, everything you need is included.
Description
|
|
Use with our Poly Pump Tube. |
|
|
Lever type, Dispensing Nozzle. Similar to a fuel type nozzle. Very positive on and off control. |
|
|
Long 8' (2.44m) hose. |
|
|
Tough, reinforced Polypropylene hose and nozzle, withstands, caustic soda, alcohol, vegetable oils, etc. |
Specifications
|
|
8' (2.44m) Polypropylene, reinforced, 3/4" (19mm) hose |
|
|
All connectors necessary for hose and Dispensing Nozzle.
|
|
Note: If you are not
sure it will pump your product, send a 16oz sample to
us. See bottom of this page for address. We will not be
able to tell you over the phone. |
|
| |
|
Click Image to Enlarge
HANDcraft
Stainless Pump Nozzle Kit | |
|
Model: AC1107 |
Handcraft Stainless Pump Nozzle Kit |
$134.00
|
|
|
|
|
|
|
The ideal way to dispense from your Pumps. Great control, as easy as pumping gas. Quick to install, everything you need is included.
Description
|
|
Use with our Stainless Steel Pump Tube. |
|
|
Lever type, Dispensing Nozzle. Similar to a fuel type nozzle. Very positive on and off control. |
|
|
Long 8' (2.44m) hose. |
|
|
Tough, reinforced Polypropylene hose and nozzle, withstands, caustic soda, alcohol, vegetable oils, etc. |
Specifications
|
|
8' (2.44m) Polypropylene, reinforced, 1" (59mm) hose |
|
|
All connectors necessary for hose and Dispensing Nozzle.
|
|
Note: If you are not
sure it will pump your product, send a 16oz sample to
us. See bottom of this page for address. We will not be
able to tell you over the phone. |
|
| |
|
Click Image to Enlarge
HANDcraft
1-0z Lotion Transfer Pump | |
|
Model: AC1219 |
HANDcraft 1-0z Lotion Transfer Pump |
$5.39
|
|
|
|
|
|
|
Want an inexpensive easy way to hand fill your bottles? Dispense ¼ oz, ½ , ¾ or 1 oz at a time from a standard gallon pail.
Description
|
|
1 oz Lotion Transfer Pump has 11” tube length and a 38 mm cap.
|
|
Note: If you are not
sure it will pump your product, send a 16oz sample to
us. See bottom of this page for address. We will not be
able to tell you over the phone. |
|
|
|
With the calibrated plunger, you select the quantity you wish to dispense up to 1 oz. |
Specifications
|
|
Fits Standard Gallon |
|
|
38 mm cap. |
|
|
FDA compliant for food applications |
|
|
11” tube length |
| |
|
Click Image to Enlarge
HANDcraft
1-oz Lotion Transfer Pail Pump | |
|
Model: AC1220 |
HANDcraft 1-oz Lotion Transfer Pail
Pump |
$6.18
|
|
|
|
|
|
|
Dispense your lotions directly from your 5 gallon pail into your bottles! Select any of the 4 calibrated settings: ¼ oz, ½ oz, ¾ oz or 1 oz.
Description
|
|
HANDcraft 1 oz Lotion Transfer Pail Pump has 17” tube length. |
|
|
With the calibrated plunger, you select the quantity you wish to dispense up to 1 oz.
|
|
Note: If you are not
sure it will pump your product, send a 16oz sample to
us. See bottom of this page for address. We will not be
able to tell you over the phone. |
|
Specifications
|
|
Fits 5-gallon pails with senior Rieke adapter. |
|
|
Also fits Senior Rieke Flex Spouts |
|
|
Comes with Senior Rieke Adapter |
|
|
17” tube length |
|
|
Calibrated plunger |
| |
|
Click Images to Enlarge
HANDcraft
8-oz Lotion
Transfer Drum Pump |
|
HANDcraft
8-oz Lotion
Transfer Drum Pump | |
|
Model: AC1221 |
HANDcraft 8-oz Lotion Transfer Drum
Pump |
$20.87
|
|
|
|
|
|
|
Transfer your lotions or liquids easily and
quickly. Choose from the 2 oz, 4, 6 or 8 oz
settings. Remember this is not going to be nearly as
accurate as our Easy Fill Bottle Filler but is
definitely better than trying measure the flow from
our larger pumps. This is a good, inexpensive start
for the Handcrafter.
Description
|
|
HANDcraft 8 oz Lotion Transfer Drum Pump. Will pump most liquids
up to the consistency of an average hand lotion or sun screen.
|
|
Note: If you are not
sure it will pump your product, send a 16oz sample to
us. See bottom of this page for address. We will not be
able to tell you over the phone. |
|
|
|
With the calibrated plunger, you select the quantity you wish to dispense up to 8 oz. |
|
|
See our FAQ page for a good tip
on using this pump on buckets without a Reike Spout. |
Specifications
|
|
Works on 5 and 6 gallon buckets with
Senior Rieke Flex Spout |
|
|
Works with 15, 20, 30, & 55 gallon
drums, with 2” National Pipe Thread openings. |
|
|
Adapts to standard drum openings,
both ¾” and 2” National Pipe Thread. |
|
|
Adjusts to 2, 4, 6 & 8 ounce
settings. (57gr,113gr,170gr, 227gr) |
|
|
Good Chemical Resistance to many
fluids |
|
|
Spout is 5/8" (16mm) outside
diameter, 1/2" (13mm) inside diameter. |
|
|
Body is 11” (28cm) Long x 2” (5cm)
Diameter. |
|
|
|
