Custom Designed

To Your Bar Size

We work with you to

obtain your ideal pour

weight and block size.

Cuts Both Loafs and Bars With One Piece Of Equipment!

Choose One of our

Combo Models

2 Sizes to

Choose From!

This Soap Cutter combo is a great way to get started producing soap professionally. We have manufactured this soap cutting system for over twelve years.

Hundreds of these soap cutting systems are in service, all over the World helping Handcrafters to produce high quality, perfect bars of soap every time.

Now we have made things even easier for the New Handcrafter!

We have chosen two of the most popular bar sizes and have put a package together that saves you time and money.

If you don’t have a bar size in mind, here is “The Ideal Solution”. This system will produce 240 perfect bars, using one mold.

What You Get With the HANDcraft Manual Soap Cutter Combo System

Step by Step Instructions. Easy to follow instructions that when followed, will produce perfect bars and premium quality soap.

	One Manual Soap Cutter, complete with Bar and Loaf Cutting Frames and Tables.
	One Double Celled Pro Soap Mold
	SoapMaker Software. Absolutely the best soapmaking software available for our Industry.
	1 - Lot of Extra Wire for both Cutting Frames
	1 - Rubber mallet
	100’ of our special Mold Release Liner Paper with Spreader.

Cuts both Loafs and Bars with One piece of equipment.

2 Cutting Frames and 2 Cutting Tables included (Loaf and Bar).

Two Cutting Frames and Cutting Tables are supplied with the Manual Soap Cutter; a loaf cutting grid and table and a bar cutting grid and table.

A compact piece of equipment that is tough, durable and easy to use, easy to clean. You will wonder how you got by without it!

The cutting frames glide smoothly on Linear Bearings and hardened steel, guide rods.

The only maintenance is oiling the linear bearings occasionally.

Cutting Frames & Tables are easily and quickly interchanged.

Special, High tensile strength wire for lasting durability and clean cutting. Wire replacement is easy with our adjustable tension bolts. Your wires can last years.

Extra Cutting Frames are available for Hotel size bars, multiple bar sizes and private label customers.

Your Professional Soap Cutter will cut, Cold Processed and Hot Processed soap with ease.

THIS SOAP CUTTER IS NOT FOR CUTTING MELT AND POUR OR GLYCERIN SOAP.

Made to last a lifetime using tough, High Density, Food Grade, plastic.

Easy to clean and No maintenance.

Easy to disassemble and de-mold. Your block of soap can be out of the mold and ready to cut in less than a minute!

Double celled - to allow for the pouring of two blocks of soap at the same time.

Better saponification is achieved in our molds due to even and sustained temperatures, giving your soap a complete conversion of oils to glycerin and soap.

You do not have to pour full depth!

	One misunderstanding about large block pours is that you have to fill it up, you don’t. Filling your mold just gives you the least waste per pound of soap poured.
	You can pour 4” (10cm) deep, 4 bars deep, 7 bars deep, whatever you want. Your software will calculate the batch size for you.

Things you can do with Block Molds:

	Sample batches are no problem. You can pour just a couple of bars deep. Cut the short loaves just as you would the longer loaves.
	Swirling and Marbling….no problem. You can do it in the mold or in the pot.
	Designs and Layering….no problem. Embed designs right into the mold. (See our Soap Shaper). Layering can be done using various colors from several different pours.
	Pretty much anything you can do with a tray or loaf mold, you can do with a block mold.

3.75 Ounce Bar

Your Bar Size:

	Your “Wet Cut” bar will be 1 1/4”x 2”x 3” (32mm x 51mm x 76mm).
	Your “Cured” bar size….now that is a something we can only approximate. But, No worries! We can get you close. Ingredients, base oils, curing, storing, ambient air temperature, water, etc., are all factors that affect your bar. If you have herbs, clays, oatmeal, etc. in your bar, it will not shrink quite as much. 1 3/16”x 1 7/8”x 2 13/16” (30mm x 48mm x 71mm)
	Your “Wet Cut” bar weight will be about 4.25 oz. (120g). Again, formulation will always make a difference in your bar weight, wet or dry.
	Your “Cured” bar weight will be around, 3.80 oz. (108g). You will have a little cushion if you want a bar around 3.75 oz. or a 100 gram bar.

Your Batch Weights and Pour Depths: 3.75 Ounce bar

	Pour Depth: Your Ideal pour depth is about 13” (33cm). This gives you around ¼” (5mm) trim top and bottom of the loaf. In most cases, trim is not really necessary on the bottom.
	Remember, for the least amount of trim, you can tweak your pour depth with the great soapmaking software we give you.
	Batch Weight: Start out with a 33.5 lb (15.23kg) batch (water & oils). Again, you can tweak this with your software.

How Many Bars Do You Get:

	You can make 120 bars per cell of your mold. Your total mold will produce 240 bars.
	Remember you don't have to pour a full batch, you can pour any amount you want. You just make shorter loaves.
	You're Free Software can calculate you smaller batch size.

4.00 Ounce Bar

Your Bar Size:

	Your “Wet Cut” bar will be 1”x 2 1/4”x 3 5/8” (25mm x 57mm x 92mm).
	Your “Cured” bar size….now that is a something we can only approximate. But, No worries! we can get you close. Ingredients, base oils, curing, storing, ambient air temperature, water, etc., are all factors that affect your bar. If you have herbs, clays, oatmeal, etc. in your bar, it will not shrink quite as much. 15/16”x 2 1/8”x 3 3/8” (24mm x 54mm x 86mm)
	Your “Wet Cut” bar weight will be about 4.66 oz. (132g). Again, formulation will always make a difference in your bar weight, wet or dry.
	Your “Cured” bar weight will be around, 4.15 oz. (118g). You will have a little cushion if you want a bar around 4 oz. or a 112 gram bar.

Your Batch Weights and Pour Depths: 4.00 Ounce bar

	Pour Depth: Your Ideal pour depth is about 13.5” (34cm). This gives you around ¼” (5mm) trim top and bottom of the loaf. In most cases, trim is not really necessary on the bottom.
	Remember, for the least amount of trim, you can tweak your pour depth with the great software we give you.
	Batch Weight: Start out with a 47 lb (21.4kg) batch (water & oils). Again, you can tweak this with your software.

How Many Bars Do You Get:

	You can make 156 bars per cell of your mold. Your total mold will produce 312 bars.
	Remember you don't have to pour a full batch, you can pour any amount you want. You just make shorter loaves.
	You're Free Software can calculate you smaller batch size.

Your soap mold is made from tough, 3/4” (1.9cm) Food Grade, HDPE (high density polyethelene) plastic.

Two cells per mold.

The Soap Cutter has a Small Footprint - only 18" x 18" (46 x 46 cm). Place it anywhere.

Protected with a tough, baked on powder coat, enamel finish.

The Soap Cutter is 18” (46cm) high. The best placement is at knee height for easy use of body weight.

Light enough to move but heavy enough to stay put when working with it. 65 lbs (29Kg), total weight.

Can be shipped UPS.

Plenty of extra wire is supplied with your cutter.

Linear Bearings for super smooth action.

Each frame has a Thumb Lever Stop, to hold the frame at the top.

One year parts and labor warranty. Built to last a lifetime.

Cutting Frames have removable wire bars. So if you decide to permanently change your bar or loaf size, it is easy to do.

Extra Cutting Frames and Tables for different full size bars or hotel size bars.

Extra Wire: includes both sizes, for bar and loaf frames.

Manual Soap Cutter Easy Hoist System - Click Here for more info and picture.

Manual Soap Cutter Work Bench - See Below

PRICING - HANDcraft Manual Soap Cutter Combo System

Model

Description

Price

Purchase

HCS3

HANDcraft Cutter System 3.75 oz

Includes Mold and Soap Cutter

$1,865.00

HCS4

HANDcraft Cutter System 4.00 oz

Includes Mold and Soap Cutter

$1,865.00

HANDcraft Cutter Work Bench (DETAILS)

$595.00

MCEHS

Easy Hoist System (DETAILS)

$454.00

ELFMC

Extra Loaf Cutting Frame and Table

$550.00 ea

EBFMC

Extra Bar Cutting Frame and Table

$550.00 ea

All Prices USD

Diagram of the

Layout of loaves, in one cell of the

Manual Cutter Pro Mold

Click Image to Enlarge

Diagram of the

Layout of bars, , in one cell of the

Manual Cutter Pro Mold

Click Image to Enlarge